Creality K2 Pro Combo 3D Printer
Printing Specifications
Printing Technology: FDM (Fused Deposition Modeling)
Build Volume: 300 x 300 x 300 mm³
Motion System: CoreXY Architecture
Max Printing Speed: ≤600 mm/s
Max Acceleration: ≤20,000 mm/s²
Layer Height: 0.05 - 0.3 mm
Extruder & Temperature System
Extruder Type: Proximal Dual-Gear Direct Drive Extruder (40 mm³/s Flow Rate)
Nozzle Type: Steel-tipped Tri-metal Quick-swap Nozzle
Nozzle Diameter: 0.4 mm (Standard)
Max Nozzle Temperature: ≤300 °C
Max Heatbed Temperature: ≤110 °C
Active Chamber Heating: Yes (Up to 60 °C)
Build Plate Surface: Dual-face Flexible PEI Spring Steel Plate
Multicolor System (Creality Filament System - CFS)
Multicolor Capacity: 4-Color printing per unit (Included in Combo)
Expandability: Supports up to 4 x CFS units daisy-chained for up to 16 colors
Smart Handling: Automated loading/unloading, Automatic spool backup switching
Environmental Control: Sealed airtight design with built-in digital temperature/humidity display and desiccant slots
RFID Recognition: Yes (Reads filament type, color, and optimal parameters automatically)
Intelligence & Monitoring
Motor Type: Precise Step-Servo Motors (X/Y Axes and Extruder)
Leveling Mode: Smart Auto Leveling (Probes specific print-mesh zones)
Dual AI Cameras: 1 x Chamber AI Camera (720P @30fps for spaghetti detection, monitoring, and timelapses) + 1 x Nozzle AI Camera (Flow rate calibration and blockage warnings)
Audible Alerts: Yes (Built-in alarm sounds)
Connectivity & Software
Connectivity: Wi-Fi (2.4G), Ethernet (RJ45), USB Drive, Creality 485 Port
Slicing Software: Creality Print 6.0 and higher
File Formats: G-code, 3MF
Internal Storage: 32GB EMMC
Filament Compatibility
Supported Filaments: PLA, PETG, PET, ABS, ASA, PLA-CF, PA-CF, PPA-CF
Filament Diameter: 1.75 mm
Sensors: Filament Run-out Sensor, Filament Tangle Detection, Filament Clogging Detection, Power Loss Recovery
Physical Specifications
Chassis Build: Fully Enclosed Aerospace-grade Aluminum Frame with semi-translucent panels
Printer Dimensions: 445 x 477 x 573 mm³
Net Weight: 23.7 kg
Air Purifier: Yes (1 x Built-in Hepa/Carbon Filter)
Cooling Fans: 1 x Toolhead Fan, 1 x Auxiliary Cooling Fan, 1 x Chamber Exhaust Fan
Power Requirements
Rated Voltage: 100-240V~, 50/60Hz
Rated Power: 1300W Max
Original: $1,297.10
-70%$1,297.10
$389.13
Description
Printing Specifications
Printing Technology: FDM (Fused Deposition Modeling)
Build Volume: 300 x 300 x 300 mm³
Motion System: CoreXY Architecture
Max Printing Speed: ≤600 mm/s
Max Acceleration: ≤20,000 mm/s²
Layer Height: 0.05 - 0.3 mm
Extruder & Temperature System
Extruder Type: Proximal Dual-Gear Direct Drive Extruder (40 mm³/s Flow Rate)
Nozzle Type: Steel-tipped Tri-metal Quick-swap Nozzle
Nozzle Diameter: 0.4 mm (Standard)
Max Nozzle Temperature: ≤300 °C
Max Heatbed Temperature: ≤110 °C
Active Chamber Heating: Yes (Up to 60 °C)
Build Plate Surface: Dual-face Flexible PEI Spring Steel Plate
Multicolor System (Creality Filament System - CFS)
Multicolor Capacity: 4-Color printing per unit (Included in Combo)
Expandability: Supports up to 4 x CFS units daisy-chained for up to 16 colors
Smart Handling: Automated loading/unloading, Automatic spool backup switching
Environmental Control: Sealed airtight design with built-in digital temperature/humidity display and desiccant slots
RFID Recognition: Yes (Reads filament type, color, and optimal parameters automatically)
Intelligence & Monitoring
Motor Type: Precise Step-Servo Motors (X/Y Axes and Extruder)
Leveling Mode: Smart Auto Leveling (Probes specific print-mesh zones)
Dual AI Cameras: 1 x Chamber AI Camera (720P @30fps for spaghetti detection, monitoring, and timelapses) + 1 x Nozzle AI Camera (Flow rate calibration and blockage warnings)
Audible Alerts: Yes (Built-in alarm sounds)
Connectivity & Software
Connectivity: Wi-Fi (2.4G), Ethernet (RJ45), USB Drive, Creality 485 Port
Slicing Software: Creality Print 6.0 and higher
File Formats: G-code, 3MF
Internal Storage: 32GB EMMC
Filament Compatibility
Supported Filaments: PLA, PETG, PET, ABS, ASA, PLA-CF, PA-CF, PPA-CF
Filament Diameter: 1.75 mm
Sensors: Filament Run-out Sensor, Filament Tangle Detection, Filament Clogging Detection, Power Loss Recovery
Physical Specifications
Chassis Build: Fully Enclosed Aerospace-grade Aluminum Frame with semi-translucent panels
Printer Dimensions: 445 x 477 x 573 mm³
Net Weight: 23.7 kg
Air Purifier: Yes (1 x Built-in Hepa/Carbon Filter)
Cooling Fans: 1 x Toolhead Fan, 1 x Auxiliary Cooling Fan, 1 x Chamber Exhaust Fan
Power Requirements
Rated Voltage: 100-240V~, 50/60Hz
Rated Power: 1300W Max
